Category Archives: Amplifier

TPA3251-3CH-200W

 

TPA3251 3ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0100-3-A is a 3 channel class D amplifier module base on TPA3251D2EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • Configurable for 2.2 Channel(EAUMT-0100-4-A) or 2.1 Channel
  • This module had been tested and verified, please refer to Test Report for detail.

Key Features

  • Enhanced design with very low output noise (62uV/A-weighted) and lower THD+N (0.0015%/20W/4ohm)
  • 2 Channel 100W/4ohm,1 Channel 200W/2ohm at 30V 1% THD+N
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(105mm*105mm*35mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 24V~36 V(UVP:24V)



Appendix Picture



 

 

 

TPA3251-4CH-100W

 

TPA3251 4ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0100-4-A is a 4 channel class D amplifier module base on TPA3251D2EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • Configurable for 2.2 Channel or 2.1 Channel(EAUMT-0100-3-A)
  • This module had been tested and verified, please refer to Test Report for detail.

Key Features

  • Enhanced design with very low output noise (62uV/A-weighted) and lower THD+N (0.0015%/20W/4ohm)
  • 4 Channel 100W/4ohm at 30V 1% THD+N
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(105mm*105mm*36.5mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 24V~36 V(UVP:24V)



Appendix Picture



 

TPA3255-1CH-480W

 

TPA3255 1ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0480-1-A is a 1 channel class D amplifier module base on TPA3255EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • This module had been tested and verified, please refer to Test Report for detail.

Key Features

  • Enhanced design with very low output noise (85uV/A-weighted) and lower THD+N (0.003%/20W/4ohm)
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(105mm*90mm*36.5mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 24V~51 V(UVP:24V)



Appendix Picture


 

 

TPA3250-2CH-50W

 

TPA3250 2ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0050-2-A is a 2 channel class D amplifier module base on TPA3250EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • This module had been tested and verified, please refer to Test Report for detail.

Key Features

  • Enhanced design with very low output noise (85uV/A-weighted) and lower THD+N (0.0025%/10W/8ohm)
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(85mm*60mm*13mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 18V~32 V(UVP:18V)

Board Setup

  • Below show the detail setup of this Amplifier Board,including 2 Power supply connectors that easier and one more option for user in their DIY assembly.
  • OUT-A ~ OUT-D are the audio output of amplifier for you speaker connection.
  • INA ~ IND are the audio input(Single-end or Differential) from your Pre-Amplifier or other devices.
  • 3V3 LED and warming LED are status indicator for board operation.



Appendix Picture



  • Full assembly board

 

  • Output noise level (A-weighted)

 

  • THD+N vs frequency (20W/4ohm)

 

  • THD+N vs output power

TPA3255-2CH-260W

 

TPA3255 2ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0260-2-A is a 2 channel class D amplifier module base on TPA3255EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • This module had been tested and verified, please refer to Test Report for detail.

Key Features

  • Enhanced design with very low output noise (85uV/A-weighted) and lower THD+N (0.003%/20W/4ohm)
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(105mm*90mm*36.5mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 24V~51 V(UVP:24V)

Board Setup

  • Below show the detail setup of this Amplifier Board,including 2 Power supply connectors that easier and one more option for user in their DIY assembly.
  • OUT-A ~ OUT-D are the audio output of amplifier for you speaker connection.
  • INA ~ IND are the audio input(Single-end or Differential) from your Pre-Amplifier or other devices.
  • 3V3 LED and warming LED are status indicator for board operation.

 



Appendix Picture



  • Full assembly board

 

  • Output noise level (A-weighted)

 

  • THD+N vs frequency (20W/4ohm)

 

  • THD+N vs output power

TPA3251-2CH-140W

 

TPA3251 2ch

PurePath™ Ultra-HD

Class D Audio Amplifier

 





Overview

  • EAUMT-0140-2-A is a 2 channel class D amplifier module base on TPA3251D2EVM with customized design and mainly suit for both consumer and professional DIY project.
  • To obtain lower noise and lower THD+N, We successful achieved by improved design on low noise analog front end, PCB layout and also components selection.
  • This module had been tested and verified, please refer to Test Report for detail.

 

Key Features

  • Enhanced design with very low output noise (62uV/A-weighted) and lower THD+N (0.0015%/20W/4ohm)
  • Fully differential layout design for better noise cancellation
  • Smaller and Compact size(105mm*90mm*36.5mm – L*W*H)
  • Additional power ON/OFF reset circuit for Pop noise suppression
  • BTL configuration only for best audio performance
  • Single supply voltage range 24V~36 V(UVP:24V)

 

Board Setup

  • Below show the detail setup of this Amplifier Board,including 2 Power supply connectors that easier and one more option for user in their DIY assembly.
  • OUT-A ~ OUT-D are the audio output of amplifier for you speaker connection.
  • INA ~ IND are the audio input(Single-end or Differential) from your Pre-Amplifier or other devices.
  • 3V3 LED and warming LED are status indicator for board operation.

 

 



Appendix Picture



  • Full assembly board

 

 

 

  • Output noise level (A-weighted)

 

  • THD+N vs frequency (20W/4ohm)

 

  • THD+N vs output power